I convert my old Ion iCade into a Bartop Raspberry Pi Powered Arcade Machine! 'How to' guide inside. IT'S FINISHED!

Anything to do with games at all.
User avatar
Dual
Member
Joined in 2008

PostRe: I convert my old Ion iCade into a Bartop Raspberry Pi Powered Arcade Machine! 'How to' guide inside. IT'S FINISHED!
by Dual » Sun Feb 25, 2018 6:50 pm

:lol:

User avatar
Green Gecko
Treasurer
Joined in 2008

PostRe: I convert my old Ion iCade into a Bartop Raspberry Pi Powered Arcade Machine! 'How to' guide inside. IT'S FINISHED!
by Green Gecko » Tue Feb 27, 2018 12:46 am

Ad7 wrote:
Hyperion wrote:Is the light from ADcade not prohibitively bright? Like a mini sun there!


Not at all. I've currently got the led coil just dropped in the top. I'll trim it down and have it a it further back soon enough. I intentionally left the white protective film on the back side of the rear acrylic panel to difuse the light.

I'm doing a massive etched window job for a restaurant in a few days, happy to send you a piece of that it's about 56% transmissive and the solvent adhesive will take a little heat no problem (it's good for 7 years..)

Alternatively if you want to colour it and cut it exactly just let me know, only need an SVG, just stick it on the back.

https://www.metamark.co.uk/products/met ... lver-etch/
https://www.metamark.co.uk/products/met ... olourchart

"It should be common sense to just accept the message Nintendo are sending out through their actions."
_________________________________________

❤ btw GRcade costs money and depends on donations - please support one of the UK's oldest video gaming forums → HOW TO DONATE
User avatar
Lorn64
Member
Joined in 2018
Contact:

PostRe: I convert my old Ion iCade into a Bartop Raspberry Pi Powered Arcade Machine! 'How to' guide inside. IT'S FINISHED!
by Lorn64 » Tue Feb 27, 2018 5:19 am

That's class. Well done, Ad!

Image
Image

Image ImageImageImage
User avatar
Victor Mildew
Member
Joined in 2009

PostRe: I convert my old Ion iCade into a Bartop Raspberry Pi Powered Arcade Machine! 'How to' guide inside. IT'S FINISHED!
by Victor Mildew » Tue Feb 27, 2018 10:33 pm

Green Gecko wrote:
Ad7 wrote:
Hyperion wrote:Is the light from ADcade not prohibitively bright? Like a mini sun there!


Not at all. I've currently got the led coil just dropped in the top. I'll trim it down and have it a it further back soon enough. I intentionally left the white protective film on the back side of the rear acrylic panel to difuse the light.

I'm doing a massive etched window job for a restaurant in a few days, happy to send you a piece of that it's about 56% transmissive and the solvent adhesive will take a little heat no problem (it's good for 7 years..)

Alternatively if you want to colour it and cut it exactly just let me know, only need an SVG, just stick it on the back.

https://www.metamark.co.uk/products/met ... lver-etch/
https://www.metamark.co.uk/products/met ... olourchart


Thanks, but the protective film on the back is good enough for what I need at the moment, and I can sandwich a bit of coloured film or something at some point to change the colour if I want. One thing I do want to do is add some hard wearing vinyl to the sides (the rough black stuff you get on old arcade machines). The sides are picking up more marks than I expected and I'm being really careful with it at the moment, so god knows how grubby they will get when other people use it.

Hexx wrote:Ad7 is older and balder than I thought.
User avatar
Green Gecko
Treasurer
Joined in 2008

PostRe: I convert my old Ion iCade into a Bartop Raspberry Pi Powered Arcade Machine! 'How to' guide inside. IT'S FINISHED!
by Green Gecko » Tue Feb 27, 2018 10:47 pm

Not sure about a Tolex style finish so I'll look into it but I can get carbon fibre effect which is very nice and generally used to wrap sportscars. It's 125 micron so twice as thick as standard vinyl, it's a cast film so if you could figure out a net or any roundovers you could smooth it over edges as well with a hairdryer for that rounded off look. It's rated for 5 years exterior use so, I'd like to see what kind of abuse it can take.

Of course I'd CAD-cut it, a laser would just melt it.

Image

"It should be common sense to just accept the message Nintendo are sending out through their actions."
_________________________________________

❤ btw GRcade costs money and depends on donations - please support one of the UK's oldest video gaming forums → HOW TO DONATE
User avatar
Victor Mildew
Member
Joined in 2009

PostRe: I convert my old Ion iCade into a Bartop Raspberry Pi Powered Arcade Machine! 'How to' guide inside. IT'S FINISHED!
by Victor Mildew » Tue Feb 27, 2018 10:51 pm

Cheers, I'm not really into carbon fibre type stuff, tolex type stuff looks ideal.

Hexx wrote:Ad7 is older and balder than I thought.
User avatar
Green Gecko
Treasurer
Joined in 2008

PostRe: I convert my old Ion iCade into a Bartop Raspberry Pi Powered Arcade Machine! 'How to' guide inside. IT'S FINISHED!
by Green Gecko » Tue Feb 27, 2018 11:08 pm

I can't cut this myself so it would be getting the scalpel out, I could try plotting it anyway provided it doesn't ruin the machine

Image

It's 110u so still thicker than standard stuff.

Sorry for the strawberry floated compression, my tethering is doing it.

Edit: this is silly, I can find denim and snakeskin for wrapping cars but leather you'd have thought would be easy, bloody hipsters

You could also try iron-on PU flex film which does come in leather effects, just layer it flush over the piece and iron over evenly and the adhesive is strong enough to stick to plastic, I know because I've done it by accident. :shifty:

Cast vinyl again:

Image

That's black apparently. But it's £78 per metre :shock: nope nope nope

"It should be common sense to just accept the message Nintendo are sending out through their actions."
_________________________________________

❤ btw GRcade costs money and depends on donations - please support one of the UK's oldest video gaming forums → HOW TO DONATE
User avatar
Victor Mildew
Member
Joined in 2009

PostRe: I convert my old Ion iCade into a Bartop Raspberry Pi Powered Arcade Machine! 'How to' guide inside. IT'S FINISHED!
by Victor Mildew » Wed Feb 28, 2018 6:23 am

Bargain :datass:

Hexx wrote:Ad7 is older and balder than I thought.
User avatar
Green Gecko
Treasurer
Joined in 2008

PostRe: I convert my old Ion iCade into a Bartop Raspberry Pi Powered Arcade Machine! 'How to' guide inside. IT'S FINISHED!
by Green Gecko » Wed Feb 28, 2018 7:03 pm

That's some top level Ryan Friedlinghaus gooseberry fool. Leather Bentleys :lol:

I'll see if I can squeeze some of that less insane leather stuff into my intake for science :cool:, I'm picking up a continuously variable heatgun from the same distro this week because it's so strawberry floating cold it's freezing my adhesives. :dread:

"It should be common sense to just accept the message Nintendo are sending out through their actions."
_________________________________________

❤ btw GRcade costs money and depends on donations - please support one of the UK's oldest video gaming forums → HOW TO DONATE

Return to “Games”

Who is online

Users browsing this forum: Dowbocop, ITSMILNER, kuliand, OldSoulCyborg, Robbo-92, shy guy 64 and 252 guests